Construction & Safety courses

OSHA 30-Hour Construction Training Online

This comprehensive training provides essential education on worker rights, employer responsibilities, and methods to identify, abate, avoid, and prevent job-related hazards. Key Features of the Course:  #1 Trusted OSHA-Authorized Training  Earn IACET approved CEUs  Official Plastic OSHA DOL Wallet Card  100% Online, Self Paced Training  Construction Industry Outreach Training Course30-Hour Program - Designed for workers with some safety responsibility:  While covering essential safety topics, this training requires additional site-specific information and hands-on skill demonstrations to fully satisfy OSHA standards  The 30-Hour program will require more than 30 hours to complete  Upon successful completion, students receive an official U.S. Department of Labor cardEligibility Requirements:  Training is only available to individuals within the geographic jurisdiction of the Occupational Safety and Health (OSH) Act.   Trainees outside this jurisdiction will not receive certification cardsProgram Status: While voluntary at the U.S. federal level, this training is often required by many jurisdictions, employers, and unions.

Lithium-Ion Battery Suite

This course is divided into six independent modules that cover the topics of lithium-ion battery introduction, handling, transportation, disposal, and incident preparedness and response planning. Module 1 briefly introduces lithium batteries, including their characteristics and potential faults. Module 2 covers safe handling guidelines for most types of lithium-ion batteries. Module 3 is a brief introduction to the complex regulations for the transport of lithium-ion batteries. Modules 4 and 5 cover safe storage and disposal. Module 6 covers incident preparedness and response planning, including general steps for handling incidents, such as lithium-ion battery fires.

Environmental Responsibility Suite

OSHA 10: General Industry Outreach Training Course

This program provides information about worker rights, employer responsibilities and how to identify, abate, avoid and prevent job-related hazards. Although many essential safety topics are covered, additional site-specific information and hands-on demonstrations of skills are ultimately needed for your safety and to fulfill training requirements found in OSHA standards. Many jurisdictions, employers and unions require this course, which is voluntary at the U.S. federal level. Each student who completes the program will receive a completion card issued by the U.S. Department of Labor. OSHA Outreach Training is only available to trainees within the geographic jurisdiction of the Occupational Safety and Health (OSH) Act. Trainees outside this jurisdiction will not receive cards for course completion. This 10-Hour program is primarily intended for entry-level workers, and the 30-Hour program is for workers with some safety responsibility. The program will take longer than 10 hours.

Advanced Safety Orientation for Construction Industry

The Advanced Safety Orientation for Construction Industry program is a series of safety courses that target hazards and precautions common to construction sites and construction-related work activities. This program is ideal for newly hired construction workers who need a solid foundation in hazard recognition skills.

CPR/AED & First Aid

Our online CPR/AED First Aid certification combo course includes Adult, Child and Infant CPR and First Aid training. The combo certification is valid for 2 years and includes a free mailed in wallet card. 

OSHA 10 Hour Construction Industry Outreach Training

Get your OSHA 10 Hour Construction online with our industry-approved training program. This essential safety course teaches workers how to identify, prevent, and address common construction site hazards while fulfilling mandatory training requirements in multiple states. Upon completion, receive your official Department of Labor OSHA 10 card recognized nationwide.Key Features of the Course:  #1 Trusted OSHA-Authorized Training  Earn IACET approved CEUs  Official Plastic OSHA DOL Wallet Card 100% Online, Self Paced Training Construction Industry Outreach Training Course

NFPA 70E Suite

NFPA 70E was created to protect people and property from the hazards associated with electricity. The courses in this suite will help learners recognize electrical hazards, apply electrical standards, use electrical safety programs and prevent or address electrical safety violations. Ideal learners include people in all industries, particularly supervisors, electrical maintenance and installation workers and safety managers. You are required to complete all courses and pass all assessments within this suite in order to receive the stated CEU Credits.

Personal Protective Equipment (PPE) Training

Workers involved in a wide range of occupations are exposed to a significant risk of death or injury from being struck by various objects in the workplace. OSHA statistics indicate that a significant portion of all work related injuries and fatalities involve workers being struck in the eyes, head, face, hand, and or feet by foreign objects. In the majority of these accidents Personal Protective Equipment (PPE) was either not being used or being used improperly. This course series will cover an array of PPE and how to decide which PPE you need to use at your workplace.

Commercial Drivers Suite

This bundle is aimed at CDL driver orientation and addresses awareness training based on the CSA 7 BASICs. This bundle includes Compliance Safety Accountability Overview for Drivers, DOT Driver Compliance, Safe Vehicle Operations, Vehicle & Roadside Inspections, Driver Wellness, Accident and Breakdown Procedures, HAZMAT Transportation - Security Awareness, Driver Fatigue, and Load Securement and Distribution.

Crane and Basic Rigging Training Package

Rigging is the process of moving heavy load with slings, chains, hoists and other special tools. The equipment used for lifting and moving loads is also called rigging. Cranes can be very dangerous when used in an unsafe manner. It is the signal person that provides instructions to the crane operator and it is vital that the crane operator follow the signal person’s instructions. Both of these individuals play an important role in the overall safety of crane operation. The Crane Signaling Awareness course covers basic skills and knowledge needed to use hand or voice signals to direct the movements of mobile and tower cranes. In addition, guidelines for using voice signals are provided.

Preventing Slips, Trips and Falls

Slips, trips and falls are common, but they are also preventable. Take these courses to learn about hazards, how to address them and what you can do to minimize risks and injuries. These courses are ideal for all employees. Courses include: Causes, Definitions and Precautions, In the Event of a Fall, Keeping Work Areas Safe, and Using Equipment Correctly.

Advanced Safety Orientation for General Industry

The Advanced Safety Orientation for General Industry program is a series of safety courses that target hazards and precautions common to manufacturing operations and other industrial settings. Employers and employees alike will benefit greatly from information provided in this program. This training is ideal for newly hired employees because it quickly helps increase foundational hazard identification skills

CPR + First Aid Combo

Our online CPR/AED First Aid certification combo course includes Adult, Child and Infant CPR and First Aid training. The combo certification is valid for 2 years and includes a free mailed in wallet card. Equip with online CPR/ First Aid certification. Valid for 2 years, includes adult, child, and infant training, with wallet card.

CPR/AED Course

 Our high quality nationally recognized CPR/AED safety training course includes Adult, Child, and Infant CPR techniques. Additionally, our CPR certification course includes training on the use of an Automated External Defibrillator (AED). The CPR/AED certification, led by experts, is valid for 2 years.

First Aid Course

First Aid is the primary medical care given to an ill or injured person until the paramedics arrive and take charge. The First Aid course we provide is easy to follow with video instructions. Join now for earning CE credit hours and a printable wallet card after passing the test

Online Bloodborne Pathogens Certification Course

Our Bloodborne course includes sessions on transmissions of pathogens, handling exposure, and protection from pathogens. The course follows OSHA guidelines and is valid for 1 year. Printable wallet card available after completing the course.

15-Passenger Van Safety

Driving a van is not like driving a car. 15-passenger vans are more susceptible to rollovers, blind spots, weight distribution issues and special handling requirements. Take this course to learn the things you need to know about driving a 15-passenger van so you can prevent avoidable collisions and injuries. Make sure you and your passengers reach your destination. Ideal learners are 15-passenger van drivers.

Access to Medical and Exposure Records for Employees (US)

The law requires your employer to provide you with access to your medical and exposure records. Why should you care? How do you get access? Take this course to find out! This course is ideal for all employees in the United States.

Access to Medical and Exposure Records for Managers (US)

Federal law provides employees with the basic right to know the extent and consequences of their exposure to the harmful substances they work with. They are entitled to access all the medical and exposure records generated for them while working for a given employer. Take this course to learn about employee rights, how to provide access to records, and what information is exempt from employee access. This course is ideal for supervisors and other employees who receive and process record requests in the United States.

Accident and Breakdown Procedures (US)

Breakdowns and accidents are unplanned events. You never know if, when, where, or how they will happen. But every time you get behind the wheel, you need to be prepared for the worst. The purpose of this course is to make you more prepared in the event of an accident or breakdown.

Concrete and Masonry

In the construction industry, many accidents, injuries and even fatalities result from formwork collapse and bracing failure during concrete and masonry construction. These incidents are preventable. Take this course to learn how to remain safe during concrete and masonry construction. This course is ideal for all construction workers.

Active Shooter: Law Enforcement

When an active shooter is in a workplace, people depend on law enforcement to stop the threat. Take this course to learn what to expect from law enforcement officers and what YOU can do to ensure they can do their jobs. This course is ideal for all employees. WARNING: The images and sounds in this course may be disturbing to some viewers.

Stay Safe in Confined Spaces: Essential Awareness for Construction

If one of your co-workers passed out in a confined space, would you go in to rescue him? Can you be sure the air in the space is safe? This training will help you understand the risks associated with confined spaces and the procedures your employer has in place to protect you and those around you. Do not take this information lightly. It can make the difference between life and death! Ideal learners are anyone who works in or around confined spaces on construction sites.